Google+ Architects

cost-effective-1AeroEdge® Protects the Roof

In addition to providing the same waterproofing as regular roof edging, AeroEdge® actually protects the roof by reducing damaging wind turbulence and their fluctuating uplift forces.  The patented aerodynamic design has been proven to reduce both the magnitude of peak uplift forces and the 'cyclical' range of forces that can gradually shorten the life expectancy of roofing materials (i.e. shingles, built-up, etc.).

Clip-On Installation 

AeroEdge® is pre-fabricated in convenient lengths and easy to install.  AeroEdge® fascia, coping and roof edging, use the same pre-fabricated retainer, connection and waterproofing as other pre-fab assemblies.  This insures that installation costs will be essentially no different than other pre-fabricated flat fascia of similar height. Example-Cross-Section

Attractive, Customizable & Specification Ready

AeroEdge® comes in an assortment of kynar finishes from our manufacturing partner Hickman Engineered SystemsAeroEdge® configurations are also customizable and available for a wide rand of fascia, coping and roof edging.

Building Department Tested & Approved

AeroEdge® curved fascia cap, is certified by Underwriters Laboratories (UL™) for compliance with  ANSI/SPRI ES-1 "Wind Design Standard for Edge ProfileSystems Used with Low Slope Roof Systems" as required  by the International Building Code (IBC). AeroEdge curved fascia has also been issued a Notice of Acceptance (NOA) by Miami-Dade County and has a product approval from the Florida Building Code (FBC).  

Compare AeroEdge® to any other rated fascia, coping or roof edging

AeroEdge® building department approved ratings range from 512 psf to 662 psf and are backed by the manufacturer’s Special 25-Year Category5SM performance warranty of up to 155 mph winds.  AeroEdge® is   the only roof edging proven to protect roofing by reducing maximum uplift forces by 50%.  

For a copy of the standard specifications or just to ask any questions:

e-mail us or call (203) 222-6025.  

The roof protects the building - AeroEdge® protects the roof.

Building Owners

  • Reduces total cost of ownership
  • Reduces potential wind damage
  • May qualify for reduced premiums

Read More

Architects & Roofing Consultants

  • Available in Kynar finishes
  • ES1, Miami-Dade & FBC approved
  • Integrates w/ most roofing systems

Read More

Roofing Contractors

  • Reduces claims for warrantied roofing repairs
  • Prefabricated design minimizes installation time and labor

Read More

Insurance

  • Help clients minimize water / roof damage and claims from hurricanes
  • Offer clients savings with potential mitigation credits

Read More

@2013 AeroEdge USA LLC - All Rights Reserved | CT Web Design by Antelope Web

cost-effective-1AeroEdge® Protects the Roof

In addition to providing the same waterproofing as regular roof edging, AeroEdge® actually protects the roof by reducing damaging wind turbulence and their fluctuating uplift forces.  The patented aerodynamic design has been proven to reduce both the magnitude of peak uplift forces and the 'cyclical' range of forces that can gradually shorten the life expectancy of roofing materials (i.e. shingles, built-up, etc.).

Clip-On Installation 

AeroEdge® is pre-fabricated in convenient lengths and easy to install.  AeroEdge® fascia, coping and roof edging, use the same pre-fabricated retainer, connection and waterproofing as other pre-fab assemblies.  This insures that installation costs will be essentially no different than other pre-fabricated flat fascia of similar height. Example-Cross-Section

Attractive, Customizable & Specification Ready

AeroEdge® comes in an assortment of kynar finishes from our manufacturing partner Hickman Engineered SystemsAeroEdge® configurations are also customizable and available for a wide rand of fascia, coping and roof edging.

Building Department Tested & Approved

AeroEdge® curved fascia cap, is certified by Underwriters Laboratories (UL™) for compliance with  ANSI/SPRI ES-1 "Wind Design Standard for Edge ProfileSystems Used with Low Slope Roof Systems" as required  by the International Building Code (IBC). AeroEdge curved fascia has also been issued a Notice of Acceptance (NOA) by Miami-Dade County and has a product approval from the Florida Building Code (FBC).  

Compare AeroEdge® to any other rated fascia, coping or roof edging

AeroEdge® building department approved ratings range from 512 psf to 662 psf and are backed by the manufacturer’s Special 25-Year Category5SM performance warranty of up to 155 mph winds.  AeroEdge® is   the only roof edging proven to protect roofing by reducing maximum uplift forces by 50%.  

For a copy of the standard specifications or just to ask any questions:

e-mail us or call (203) 222-6025.  

The roof protects the building - AeroEdge® protects the roof.

Building Owners

  • Reduces total cost of ownership
  • Reduces potential wind damage
  • May qualify for reduced premiums

Read More

Architects & Roofing Consultants

  • Available in Kynar finishes
  • ES1, Miami-Dade & FBC approved
  • Integrates w/ most roofing systems

Read More

Roofing Contractors

  • Reduces claims for warrantied roofing repairs
  • Prefabricated design minimizes installation time and labor

Read More

Insurance

  • Help clients minimize water / roof damage and claims from hurricanes
  • Offer clients savings with potential mitigation credits

Read More

Created and designed by Pixelsparadise.com
With help of Bootstrap Framework and Flexslider by Madebymufffin

Joomla! ® name is used under a limited license from Open Source Matters
Pixelsparadise.com is not affiliated with the Joomla! Project.

Back to top